3-1427434-4

OVERVIEW

AMP OSP (Outside plant) cables are designed for campas-type environments, Ducted or Directed burial underground service for long runs between buildings, AMP cables are tested to the TIA requirements for current and proposed applications such as 100BASE-F, 155/622 Mbps, ATM, AMP NETCONNECT distribution cables has been designed to meet or exceed the requirements of 10Gigabit while still supporting legacy LED and VCSEL The system fufills the specifications of IEEE 802.3z, Gigabit Ethernet, IEEE 802.3ae, 10Gigabit Ethernet. The cables are available with either single-mode, 62.5-micron Extended Grade or 50-micron and 50/125 Laser Optimized (XG)

The optical fiber cable shall contain [4,6,8,12] strain-free [single-mode, 62.5-micron Extend Grade or 50-micron, 50/125-micron laser optimized XG] fibers in a central PBT Loose tube surrounded by water-blocking gel, (Thixotropic Gel) and water blocking glass yarns are placed around the perimeter of the loose tube provide mechanical strength to the cable, and then a corrugated steel tape (with copolymer coating on both sides) is

then longitudinally applied as armored. TIA/EIA 598 color coded fibers for easy identified, Outer jacket 1.9mm thickness, HDPE Polyethylene jacket for UV/harsh outdoor environment protection. The cable jacket shall be

black color. The cable shall meet the applicable performance requirements listed in the following tables.

Feature

 • Suitable for inter-building backbone cabling (aerial, duct or direct burial)

 • TIA color-coded fibers for easy identification

 • Water-blocking Gel technology (Thixotropic Gel)

 • Small diameter single tube construction saves space inside ducts

 • UV-protected jacket for harsh outdoor environments

 • Low friction jacket for ease of pulling through ducts

 • Corrugated steel tape and Music Wire armor for rugged environments and rodent protection

 • Compatible with splitter kits for termination with epoxy/polish, LightCrimp and LightCrimp Plus connectors